Talks my friends this is Everton, and today I prepared a video to talk about fonts right, I received some questions regarding source, the difference, which is more advantageous, and today I’m going to talk a little bit about ta sources?, I will try to be very brief for I don’t stretch much the video, so if I jump something there leave to clarify something you ask there, suddenly I do another, or answer.
Come on then, that source here, is a font of type hive right, popularly hive, I don’t even know if that’s her name, she is known as the Beehive because she has this activity here parendo a hive, I don’t know. This model here is a model of 12 volts for 10 amperes, okay? And she is a steady source, she is stabilized analog, okay? If you notice, I don’t know if you can see right inside here, but the component group right, the way it was built, it uses analog components right, rustic, robust components right, it has a transformadorzinho right, and it works like this: will enter the energy her right here in BC, will enter there 127 or 220 volts and she will convert that energy right , stabilize and such, and will drop 12 volts for 10 amperes. It’s a great source, is very safe, in terms of food, she feeds very well, 10 amps to you call there many cameras right, if small, infrared to connect more than 10 right, and I like working a ampere for each camera, the more we know of to call more than 10 cameras.
Typically 10 amps put 16 personnel, more that’s cool by 15. Is a very good source, stabilized right, has good advantages, suddenly she Burns is easy to fix right, you take on a coach or if you even have any affinity, just measure right where the problem and fix it, has a fuse here, a proteçãozinha at the entrance right, have a filter in the output, a scheming here with filter She is very nice and cool. So, I don’t usually work a lot with her right, and I don’t really like indicate, why? because how it works here, we’re going to get there, and will install, this one until she has enough born here right, actually has four right, two positive and two negative, so if you call there ten cameras, connect five in each, will be positive, negative, five five five positive and five negative anymore.
If one of these cameras is on the outside of your House there, if the location there of your residence or your company, it is an area that has a lot of lightning and such, your camera she’s a damn right, she is a power source that’s out, suddenly she gets some discharge or suffers some overhead and such She will transmit this overload for the cameras that are connected to the same born right, will see her for the positive or the negative, as all of them are connected in the same born, one is intertwined with another right, and then if a camera burn you can end up losing the others, is simply the reason why I don’t like her , to work with her.
But she’s very good, if you’re going to use within your residence and you want to work with one is easier. Another problem also that I don’t like is, it’s not common, more suddenly you’re traveling or the location that you monitor is away, and your source, or all of a sudden she is hooked up to a ruler and this ruler to and such, all cameras will stop working right, a source only she will burn , will stop working, OK? And basically that’s it, 12 by 10 steady source.
I have here a another source, which is that source here, she is electronic okay? She is also 12 for 10, in fact, she has another advantage in that relationship, that source here, she is from MCM’s? It’s a great source, it is electronic, only that she’s here, I don’t know if you can see she has here a right, a right fit, going from 12 to 14 and such, what is this? suddenly, you were her and made a system where the camera was the 100 metres right, the DVR. And then, there are people who call not working right, or don’t work, why? To the extent that you stretch a lot, usually the power cable coaxial cable, she’s right, the trend is that energy go getting lost on the way right, fruit of the resistance that the wire carries the opposition there the passage of energy.
And there fine wire, sometimes the quality is not very good about, you will lose energy in the course and the camera may not work right? Then you fix it by adjusting this source here, you put a tiny here right, put a product here, you’re going to metro spinning, right, and then she increases as you go turning this trincote here, and then you come in 12 at the end right, is a good choice for this purpose. The rest she is almost equal to another, but it is electronic right, the set of components here is electronic, the work of the conversion from AC DC pro is different. She has a cooler here, serves to dissipate the heat right, it helps cool the source, and it’s an electronic source 12 by 10 and the application is the same that other’s? More is electronic.
And finally, I have this other source here, which is a compact electronic, she is for single use. Some guys there right, who takes a source of that here and put to five cameras right, cut here the wire and put five cameras, I’ve seen right, three, four, five, is not legal, this is two amps, more is usually an ampere, I like to work, a source for each camera. As much as in the manual of the cameras come written there, 250, 280, I’ve seen even with 650 infra-red camera, a milliamp is not based so hence, lay with spare, you won’t have a problem, there are many factors that you must consider when you will connect a camera right, as I’ve already said the gauge of the wire, quality , resistance, impedance and such.
And not to mention also that we never know the camera consumption, measure, more sometimes varies right, sometimes has more led’s, sometimes the led has more intensity, a u] another brand consumes more and such. Can we not rely on manual, boot with left there, it’s not expensive and worth it. This is cool because you can feed the camera in place, do not need to use cable with food, feeds straight at the bottom of the camera, if you want to use power cable also gives, boot a réguinha there, feeds where is the DVR, and is safer too right, usually the electronic sources, if it receives an overload and have to burn , it burns and does not pass to the front, usually.
But all of a sudden can pass also right, it’s a risk, everything that is connected to the energy run that risk. And I like working with this fontinha here, if one of them stop does not spoil the other right, is a cheap source, and generally is used in CCTV systems, and that’s what I like to use, there are people who talk like this “Oh no, is that pile of source and such”, but if you organize it right , boot two réguinhas, three réguinhas if applicable, feeds on the site, is good. This has led here, plus has some modelinhos which has led all of a sudden when burning you get there the led already deleted helps right, in identifying and anyway, that’s it.
Basically those are right, the three sources right, that the market for CCTV use, you can choose the one that suits you best, what more you identify right and touch the work there. I guess that’s it, I told the basics there, a lout of the three sources, I have cooperated with you, if you have any further questions, or clarify anything missed comments there, and I’m going to look for answer, I can even make another video. So that’s it, thanks, and thanks.