Reverse Cycle Split System Air Conditioning

The reverse split air conditioning may be the ideal device for you because it is economical and quiet.

If you want an air conditioner and is in doubt as to the type of equipment, here’s a tip: look fondly for models of reverse cycle split air conditioning. They have a modern technology that can reduce up to 40% of your energy costs, as well as being the most quiet when compared to conventional models.

The split inverter works with two parts: the evaporator installed inside the room, which is responsible for sucking the air space, cool it and return it cold to the site and the condenser, which leads to the external environment the sucked heat the evaporator and then condenses. The unit that produces noise is precisely what is on the outside, so the noise does not bother. Once connected, the compressor keeps its operation in a continuous manner, which operates at low power without shutting down, by adjusting the rotation, avoiding power consumption peaks.

Advantages of reverse split

Available options are 9000, 12000, 18000 and 22000 BTUs, the devices serve both commercial areas as well as residential. To find out which power is most appropriate, you must take into consideration factors such as the incidence of sunlight, how many people attend the space in which it will be installed, if there are many light bulbs and electronics on site. To find the most suitable air conditioner for you, do the calculation.

Also consider purchasing a hot / cold air conditioning. Some models have this feature, which can be very welcome to those who live in regions where winter is more rigorous.

Environmentally friendly

Besides these advantages, the device is also environmentally friendly! The air conditioning inverter is a sustainable alternative not only because of saving energy, but also because it uses environmentally friendly refrigerant gas.

Cleaning the appliance

Finally, the maintenance and cleaning should be done as in other equipment. For the panel, use a dry cloth or a cloth moistened with warm water. In the filter, use a vacuum cleaner to remove dust. If the dirt is soaked, use a sponge and mild detergent and dry it completely before replacing it.

Tips for installation

Choose a location where the condenser and the evaporator are not far away. Remember that the units will be connected by tubes and wires. Therefore, the closer they are, the greater the saving of materials needed for installation.

Never position the evaporator (air outlet) on electronic devices to avoid the risk of damaging them if water comes out. Do not forget to leave a comfortable distance between the unit and the ceiling, so that maintenance is done easily when necessary, and also to allow the removal of the filter for cleaning. Each device you install needs a specific circuit breaker, with exclusive wiring for it, so that the power grid is not overloaded, avoiding the risk of accidents.

The tips have helped? Share!