Today’s proposal fell on this cast of printed legging pants in size 38 (table) and 40 (Brazilian table). Mold pants have no sewing value has to be added. This publication aims to help those who have no printer. Always make the mold on paper and cut out to make any necessary correction.
Printed legging pants step by step
Cut a piece of paper with the height measurement for the back and front of pants mold.
Draw a horizontal line to the side and dividing the spaces one for front and one for the back.
Draw the leg height so as to leave room at the top for the curve on the perimeter of the belt.
Draw the perimeter of the pants strap front and back.
Draw the perimeter of the basin of the front and back.
Draw the perimeter of the hook on the front and back.
Draw the perimeter of the bottom of the leg in front and back.
Add and draw the hook on the front and back.
Draw the inside leg join the bottom of the leg to the hook on the front and back.
Alternatively the belt add to the top of the boot to put elastic fabric value.
Sewing pants step by step
Sew the inside of the legs and add the back ahead.
Sew the hook of the fronts and back.
The perimeter of the belt, turn the fabric into 3 to 4 cm and put elastic on the inside, which can also be replaced by a belt.
Sew turn inwards and hem your pants.
This model looks good on all fabrics that have good trim. It is necessary to 1 times the height of pants. 5% off (example on a 5 cm meter off), to run this model are required 1 metre and 30 cm of fabric. Requires two or a height of fabric as the width of the piece. Place the mold of legging pants emblazoned on the fabric with tailor’s chalk and scratch like this work more sophisticated professionals.