Interconnect cable in Acoustics Reference NF-1302

The in-Akustik played consistently homogeneous reference NF-1302 (355 euros per 1, 2 m stereo set).

  1. Interconnect cable in acoustics reference NF-1302
  2. Data sheet

Inside the reference NF-1302 from in-Akustik cable three PE-tubes are installed in addition to the four solid conductors for signal transmission, which should serve as a mechanical support and provide for low capacity. The whole thing is held by a film, twelve shielding wires and a PE NET in the form. The in-house, rhodium coated connectors complete the good impression. Disadvantage of this material battle: the rigid cable accordingly properly requires space behind the unit.

Sonically, the in acoustics, it held back from exemplary, played consistently homogeneous and with a wide and deep space imaging. Large orchestral, widely recorded music should consider that reference NF-1302 shortlisted.

in-akustik reference NF-1302 2010

Manufacturer in-akustik
Price €355.00
Test procedure 1.0

Technical data and test results

General
Length 0.6 and 1.2 metres
Plug own plug / rhodium-coated
Building Multiple inner conductor
Outer conductor insulation PE network
Inner conductor insulation solid and foamed PE
Material and type of the inner conductor two outward and return conductors of copper
Material and type of shielding slotted foil and single conductors.
Measured values
Series inductance 0 µH / m
Series Inductivity 794,0 nH / m
Series resistance 246,0 MΩ /.
Parallel capacity 86 pF / m
Parallel drainage 0,0880 µS / m
Cable impedance 93.1 ohm
Review
Homogeneous and balanced sound at all test facilities.
Might sound a little tangy, need space for the installation.
Audio predicate
tested in issue: 7 / 10