- Timeless classics
- Material for the jacket:
- Knitting pattern for a classic Cardigan
- Material for the sweater:
- Knitting pattern for a classic sweater
Put on and feel could be the motto for these two fine pieces. We tell you how you easily after can knit the sweater and cardigan.
Material for the cardigan:
- Lana Grossa quality “Merino Air” (90% pure new wool (Merino), 10% polyamide, Mt = approx. 130 m / 50 g): approx 200 (250-300) g taupe (FB. 10)
- Lana Grossa quality “Yak Merino” (30% new wool (Merino), 28% (baby) alpaca, 22% polyamide, 20% yak, LL about 110 m / 50 g =): approx. 300 (350-400) g raw silk (FB. 10)
- Knitting needles No. 5.5, 7 and 9
- 1 circular needle size 7, 80 cm long
- 1 leather buckle Union button, art. 59976, 100 mm, 20 dark brown.
Size: 36/38 (40/42-44/46)
The figures for size 40/42 preside in parentheses, size 44/46 after the Indent.Is only an indication, it applies to all three sizes. Here is the knitting pattern for a classic cardigan.
The 1 M of any R re str. The last M of each R such as to the left str. continue Islands Territory, while the thread before M. Note: All parts with chain edge knit!
Return and re-R re str.
And-R li, re-R re str.
And-R re, re-R li str.
12 M and 20 R smooth li with ND. Nr 7 and easy thread yak Merino 10 x 10 cm, 10 M and 14 R = smooth with ND. No. 9 and double thread yak Merino, 10 x 10 cm = li; smooth li with ND No. 5.5 and easy thread Merino air 10 x 10 cm = 15.5 M and 25 R.
Note: The arrows indicate the knitting direction in the section schema!
Start at the edge of the hem. Cast on 86 (92 – 98) STS with ND No. 5.5 and easy thread Merino air. For the aperture of 2.5 cm = 9 R kraus str., starting from re 1 and r and end. Then smooth with 1 re-R starting from re li weiterarb.. Beids to 42.5 cm = 107 R from end. for the armholes 3 M cast = 64 (70 – 76) STS. Now again just further str. In 22 (23-24) cm = 56 (58 – 60) R arm cutting height beids. for the 5 M shoulder sloping neckline, then in each 2 R still 3 x per 5 (6 – 7) M cast At the same time with the 2. shoulder acceptance for the round neckline that medium. 14 m cast and both sides separately next str. On the inner edge for the rounding in each 2 R more still 1 x 3 M and 1 m x 2 M cast Thus, the M of one side are used up. Against the same exit the other side.
Left front piece:
Cross start in direction of the arrow from side seam line. For 56 with ND. No. 7 and easy thread yak Merino STS. Smooth li str., for the Armhole on the re edge in the 3 R from stop 1 M zun., then in every 2nd row 1 x 1 M zun, 1 x 2 M, 1 x 3 M, 1 x 4 M and for the remaining arm cutting height 1 x 16 (17-19) to STS = 83 (84 – 86) STS. The end of the arm section is reached after 7 cm = 14 R from attack. Now on the re edge for the shoulder Helix in every 4th (6-6.) R 4 x per 1 M zun. = 87 (88 – 90) STS. 24 (28 – 32) R = 12 (14-16) cm shoulder width on the re = margin cast on the collar 11 M to 98 M (99-101). With increasing number of M with the P2. No. 7 next str. Now just continue the part. Smooth re weiterarb., since it when sewing the part to the outside is handled in 8 cm = 16 R collar width for the 2nd half of the collar. Cast off loosely after 8 cm = 16 R from patterns change the M.
Right front piece:
Against equal to the li Front Street
Bags (2 x St.):
Cast on 18 STS ND No. 9 with double thread yak Merino. Smooth li cross street in direction of the arrow After 12 cm = 18 R from stop the M neckline
Merino cast on 36 (38 – 40) STS with ND. No. 7 and easy thread yak. For the aperture of 1 cm = 3 R kraus 1 re-R start with re str.. Then for the high Federal plain li weiterarb. Cast off loosely after 21 cm = 42 R from end the M. Now with ND No. 5.5 and easy thread Merino air from the cast-off edge 46 (48-52 regard [= 10(10-12) x 1 M each 3 m zun].) BEIDS. still 2 x 1 M piece for the sloping 8 r from the Federal end 1 M zun, in every 12th row. = 52 (54 – 58) STS. Beids after 18 cm = 46 R from the Federal end. for the sleeve Cap 3 M cast, then in every 2nd row 1 x 2 M, 3 x per 1 M, in the 4th row 1 x 1 M, in every 6th row 4 x per 1 M, in the 4th row 1 x 1 M and again in every 2nd row or 2 x per 1 M and 1 m x 2 M cast In the following round the fasteners 16 (18 – 22) M cast
Parts clamp, wet and dry. Closing seams. The collar narrow page so add.-sewing, that last half at first is the seam on the outside. Then sew the inside edge of the collar to the rear edge of the neckline. Collar half to the outside fold and sew against. The outside seam is now on the bottom. Sew on pockets according to section schema along the front panel and flush with the edge of the hem. Insert the sleeves. Sew closure according to model at waist height.
Material for the sweater:
- Lana Grossa quality “Alta Moda Super Baby” (67% wool, 30% (baby) alpaca, 3% polyamide, LL 60 m = / 50 g): approx 750 (800-850) g Viola mix (FB. 4) or taupe (FB. 10)
- Knitting needles size 10
- 1 circular needle size 9 and 10, 60 cm long
Size: 36/38 (40/42-44/46)
Knitting pattern for a classic sweater
Knit 1 M, 1 M li in the Exchange.
And-R re, re-R li str.
Diamond cable pattern:
After the knitting font str. Re the numbers outside call the out-R. Str., as they appear the M in the re-R. In the width start over 27 M between the arrows, while in 3. R as shown 5 M Inc. = 32 M. Height 1 x then the 7-18 R continuously repeat the 1-18 R str..
11.5 M and 15.5 R smooth re with ND. No. 10 = 10 x 10 cm; No. 10 = 32 M and 15.5 R Diamond cable pattern with ND. 17 x 10 cm.
63 (67 – 71) with ND. No. 10 STS. For the Confederation of 12 cm = 21 R ribs, str. with 1 re-R and start to the edge-M with 1 M li, at the end of R end before the edge-M with 1 M li. Then continue in the following disposition: edge-M 17 (19 – 21) M stocking, 27 M diamond cable pattern, 17 (19 – 21) M stocking, edge STS. As described in the 3rd R from the Federal end in the diamond braid pattern and drawn Inc 5 M. = 32 M and a total of 68 (72 – 76) M. 31 (32-33) cm 48 (50 – 52) R from the end of Federal = both sides for armhole 3 M cast, then in each 2 R 2 x per 1 M piece = 58 (62 – 66) STS. Now again just further str. In 18 (19-20) cm = 28 (30-32) R arm cutting height all M just cast it about the diamond braid pattern alternating 1 x 2 M Add. and 1 x 1 M therefore de rRand not curl cast.
As part of the back street, but with round neckline. Already in 11 (12-13) cm = the Middle 12 STS Dec 16 (18 – 20) R arm cutting height and knitting both sides separately. On the inner edge for the rounding in every 2nd row further still 1 x 3 M, 3 x 2 M and 1 m x 1 M piece The remaining 13 (15-17) shoulder-M on the outer Randin same amount as at the back cast off. Against the same exit the other side.
45 (47 – 51) with ND. No. 10 STS. For the Federal 8 cm = 15 R ribs, str. with 1 re-R and start to the edge-M with 1 M li, at the end of R end before the edge-M with 1 M li. Then smoothly continue re. Both sides issued form in the 3rd R from the Federal end 1 M Dec, then in each 16 R still 3 x 1 M Dec = 37 (39 – 43) STS. After 37 cm = 58 R from the Federal end each side for the sleeve Cap 2 M cast, then in every 2nd row even 9 x per 1 M and 1 m x 2 M cast, in the following R the remaining 11 (13 – 17) M cast
Parts clamp, wet and dry. Closing seams. With the P2. Take no. 9 from the neck edge of the 72 M. For the Turtleneck ribbed at Rd Street In 6 cm collar height on the P2. No. 10 switch and at the same time spread Mark 5 M. Then in the following Rd each before this M 2 M pattern in accordance with zun crossed from the cross stitch. 10 increased M = = a total of 82 M. This increases further 5 cm still 1 x confirm. = 92 M. In 26 cm collar height, cast as they appear loose the M. Insert the sleeves.